Electrical testing and tagging is critical to workplace safety. Because of the increase in the number of legal cases, however, it is becoming even more important as the years go on. There are so many different ways to keep a business safe, but tagging and testing electrical equipment is going to make a big difference. Electrocution is a serious matter, and according to Australian Standard AS3760, all electrical systems must be tested and in compliance with this ordinance to reduce the risk of injury or death relate to electrocution in the workplace.

The first part of electrical testing and tagging is a visual inspection. This consists of looking at the appliance, the cord and the plug to ensure that there is no damage. It also means that the right rating plug is attached to the appliance based on its size. Wiring is checked to ensure that it is done properly, as well. Then, the machine is plugged into a portable tester that is known as the PAT, which tests the appliance to ensure that it is properly functioning and safe for use. Once the testing is completed, the appliance is tagged and put back into use. A failed test means the appliance is tagged as failed and it is removed from operation until repairs are made or a replacement is purchased.

Testing is done on a schedule depending on the environment. Because office equipment is less risky, electrical testing and tagging is only recommended every 3-5 years. However, in the factory setting or on building sites, testing every 3-6 months is recommended to ensure that things are safe and in working order. A professional is needed to carry out this service, because they will be properly trained and know what to look for. When you need this task performed, you should hire professional services to get the job done right.